anvilfire AnvilCAM-II : Blacksmith Upsetting a 2 inch bar

HOME! | STORE | Getting Started in Blacksmithing

Tell them you found it on anvilfire.com!

Upsetting a 2 inch bar : Part four of four

Josh Greenwood upsetting a 2" square bar to 3" with the help of Sandra Wilson. Taken with a still camera this could be titled how NOT to make a video. Rotation of the image and merging it with other video is so difficult that the video should just be scrapped. But there are moments you do not want to lose. So we have. . . sideways video, for SOME of the scenes.

Josh upsetting alone to get some real velocity. You can see the difference now (1-3/4" shorter!).


	Upsetting Part 1 The big fire in a severely rusted hood. . Fairbanks hammer in foreground


	Upsetting Part 2 The job continues (sideways), Josh and Sandy lifting and ramming the bar.


	Upsetting Part 3 The job continues (sideways), Josh and Sandy lifting and ramming the bar. . . .

Upsetting Part 1
The job begins, the big fire.

Upsetting Part 2
The job continues

Upsetting Part 3
The job continues


	Upsetting Part 4 The job continues, checking and straightening the upset. Sandy supporting the bar.


	Sandy striking for Josh Greenwood Making a heavy viened leaf using a sledge hammer and special fullers. Filmed at the 2007 CSI Hammer-In in Boonville, NC


	Return to Community Video.

Upsetting Part 4
The job continues

Sandy striking for Josh Greenwood
Making a heavy viened leaf using a sledge hammer.

Return to Community Video.

Upsetting a 2 inch bar : Part four of four