 |
 |
Forging and Texturing Dies:
This "double dent" die made by Russell O'Dell makes a similar texture to the "Dolly-P" hand tool made by Off-Center Tools which made the sample shown.
Various heavy texturing dies can be used as either shank mounted or as spring dies on flypresses, arbor presses and power hammers.
The two examples shown, the center-V and the spear point are common repetitive use tools that would work well under a flypress or heavy arbor press as well as forging hammers.
Off-Center tool and sample images courtesy of Kayne and Son.
|
Copyright
©
2003 Jock Dempsey, www.anvilfire.com
Webmaster email: webmaster
|
